Friday, 23 July 2004
Outlook 2003 blocking attachments, kb fix didn't work
someone sent me a .mdb attachment today and i couldn't open it in outlook. no amount of searching the options could change this behaviour. i searched online and found a few microsoft kb articles about it, and how to change the registry to add exemptions to the 'Level 1' list of file extensions, which outlook regards as unsafe. i did all the steps in the article but it still didn't work. then i found this GREAT outlook plug in which adds a tab to the outlook options and allows you to configure how outlook handles all the attachments.
How on earth MS forgot about this is beyond me. they actually suggest that you ask the person who sent it to rename the file with a bogus extension and resend the attachment. surely it is sufficient to force users to save the file to disk and then open it themselves by choice. sheesh!
Friday, 23 July 2004 17:51:56 (GMT Daylight Time, UTC+01:00) General
Wednesday, 21 July 2004
Some issues with PureComponents Navigator control 2.0
I have built a content management system in windows forms, and i set it up with individual forms to manage each of the aspects to the system. one to manage users, another for templates etc. however this made the user interface quite cluttered sometimes with several windows open. so i decided to make my app work like outlook 2003 with its nice control on the left with buttons and side panels on the left, and the main panel on the right for whichever button is selected.
i chose the pure components navigator control (2.0) and i'm testing it at the moment. i don't like the way the developers don't give a public support forum, they say it shouldn't need support, but i have had several issues with it.
the main problem i have is that the control seems to crash Visual Studio (2003 enterprise edition) when i add panels to each group and set properties such as anchoring in the designer. i ended up cutting the code to set up the panels from InitialiseComponent and pasting it into a separate function that i call in the constructor.
also, the group class is supposed to have a FitPanel() method, but it doesn't fill the panel to the size of the space in the control between the buttons. i tried setting the panel to DockStyle.Fill and it fills the entire control on top of all the other buttons. I ended up manually creating the panels (right click a group and Add Panel) and then resize it to the desired dimensions, and set the anchor to top|left|bottom|right. i must say it was quite messy though.
it seems like a great control and it works quick enough too. i'll need to do more testing before i pay for the license though.
Wednesday, 21 July 2004 23:58:51 (GMT Daylight Time, UTC+01:00) .Net Windows Forms
Monday, 12 July 2004
System tray icons in Windows forms apps
If you add a NotifyIcon (system tray icon) to a Windows forms
application, you will need to modify the dispose event of the form
containing the icon, to explicitly call dispose on the notifyIcon as
protected override void Dispose( bool disposing )
if( disposing )
if (components != null)
base.Dispose( disposing );
if you don't do this, the icon will get left in the system tray
after the application quits, until you move the mouse over the icon and
then it will disappear.
Monday, 12 July 2004 10:02:42 (GMT Daylight Time, UTC+01:00) .Net Windows Forms
Thursday, 24 June 2004
Http Status 400 trying to send large DIME attachments
Testing out my new DIME attachment code with WSE2, i ran
into http errors with large uploads. The error i got was a
System.Net.WebException saying that it was a bad request, Http status
400, with an event in the application log under WSE:
Receive Failure: Microsoft.Web.Services2.Dime.DimeFormatException:
WSE352: The size of the record
uuid:c0c3c949-5fb1-4171-88aa-06ce14499e44 exceed its limit.
I had the maxRequestLength set to 128000 in web.config, but i
found out that this does not apply to WSE2. adding the
following entry into web.config solved the problem.
<?xml version="1.0" encoding="utf-8" ?>
Thursday, 24 June 2004 09:49:24 (GMT Daylight Time, UTC+01:00) Asp.Net
<maxRequestLength>256000</maxRequestLength><!-- 256 mb -->
Wednesday, 23 June 2004
WSE 2.0 send DIME attachments from client TO a web service
I wanted to improve the performance of my winforms app sending
binary data to a web service, so i chose to upgrade to WSE 2.0 and use
the DIME specification.
I checked out the examples in the docs, but only found one with a
web service sending an attachment to a client. i wanted it the
other way around. i tried to modify it to suit my own needs,
but couldn't get it to work. (in the end i had the response and request
contexts mixed up). I searched high and low online and finally found
that there is a sample as part of the WSE full installation which
contains just what i wanted. I could find no mention of this
sample in the docs, so I am posting it here.
The code below shows the important methods, on the client and on the
server. It assumes a web project and winforms project both set up
// this is part of a winforms application with an openfiledialog
private void btnUpload_Click(object sender, System.EventArgs e)
if(this.openFileDialog1.ShowDialog() == DialogResult.OK)
DimeAttachment dimeAttach = new DimeAttachment("image/gif", TypeFormat.MediaType,this.openFileDialog1.FileName);
ws = new TestService.Test();
MessageBox.Show("No file selected");
// web service method...
public void ReceiveImage(string filename)
// Reject any requests which are not valid SOAP requests
if (RequestSoapContext.Current == null)
throw new ApplicationException("Only SOAP requests are permitted.");
if (RequestSoapContext.Current.Attachments.Count == 0)
throw new ApplicationException("No attachments were sent with the message.");
FileStream f = System.IO.File.OpenWrite(Server.MapPath("Upload/" + filename));
Stream s = RequestSoapContext.Current.Attachments.Stream;
byte bytes = new byte[s.Length];
s.Read(bytes, 0, bytes.Length);
f.Write(bytes, 0, bytes.Length);
throw ex; // or log it...
Wednesday, 23 June 2004 13:08:19 (GMT Daylight Time, UTC+01:00) .Net General
Tuesday, 22 June 2004
Adventures with .NET smart clients, running with Local Intranet permissions
I had originally deployed an app with msi but the advantages of smart clients soon began to convince me to change my deployment model.
What you can and can't do in Local Intranet
As a smart client, the app is executed as http://myserver/exec/myApp.exe
This works very nicely, until those security exceptions start appearing. I had to spend a long time going through my app to find out what was causing the exceptions. The obvious reason for the exceptions is that programs coming in from the Intranet are less trusted than those on My Computer, and hence are subject to more restrictions by the local security policy. After much exploration and reading up online, i found out some interesting facts:
- you can't access Environment.Machinename
- you can't access My Documents, or UserAppDataPath, etc.
- you can't call abort() on a Thread, but you can call Sleep() and Start()
- you can read files through openFileDialog
- you can read and write to IsolatedStorage (a virtual file-system specially for your app), very useful seeing as you can't write to any physical location on the hard disk by default.
- you can invoke delegates asynchronously
You could deduce these by looking in the .Net Framework Security Policy (control panel > admin tools > .Net Framework configuration > Runtime security policy > Machine > Permission Sets > Local Intranet), and then double click one of the items in the main pane to the right, to see what restrictions if any are applied for the selected zone.
I found out the above information hard way through trial and error, but it was a very valuable exercise to learn about the security policy.
Using a class library with your smart client app
I got a large part of my app working, but i was using a class library of customised windows forms components, and this was causing a security exception. It took a few hours to pin down, but the docs finally revealed that the class library must have the following attribute (outside a class declaration):
The app worked fine after I added that line.
Requesting permissions from the local Security Policy before your app runs.
If you are not sure what zone your app will run in, you can request a minimum level which your app requires. Add the following line of code outside a class declaration in one of the files in your project:
[assembly:PermissionSetAttribute(SecurityAction.RequestMinimum, Name = "LocalIntranet")]
This will alert the user that they don't have permissions to run the app if it is running in a zone less than Local Intranet.
I personally have found these bits of information very difficult to pull together. There is a ton of stuff about smart clients but its mostly non-technical. I even got a CD from msdn about smart clients and i found it useless for helping out with any of the problems i have encountered along the way.
I hear there is a tool called PermCalc.exe coming with Whidbey that will probe an app to see what would cause security problems in a smart client scenario but until then, we are stuck doing it manually :)
Tuesday, 22 June 2004 19:16:34 (GMT Daylight Time, UTC+01:00) .Net Windows Forms
Monday, 31 May 2004
Installing Windows XP on a Shuttle ST61G4 with SATA hard disk (no floppy drive)
This is my first post on my new PC, a Shuttle ST61G4. 3Ghz P4, 1Gb ddr 400 ram, 160Gb SATA hard disk. It feels like a small miracle that it's working, that's how difficult it was for me to install Windows XP on the SATA hard disk.
Partly it was due to me never having used SATA before, and not realising that Windows XP doesn't bundle the SATA drivers I need for the Silican SATA Controller (Si3112r) that is part of the Shuttle mainboard. Also, the most annoying part was that Windows setup only allows you to specify additional drivers from a floppy disk. The shuttle, being a modern compact PC, doesn't come with a floppy of course, so i was stumped. I really didn't want to pull out the old floppy drive from my other PC, but i was forced to in the end.
There is a way to slipstream the drivers into the Windows setup files and then burn them back to a CD, but this sounded way too complicated for me.
The CD with the shuttle mainboard drivers had instructions for how to create the required floppy for a Windows install, and this worked OK, when i finally figured out how to get the Shuttle to recognise the floppy drive. It took a while to find the plug in the motherboard for the floppy, at the back around the side under the power supply. Then i had to enable Floppy Disk 1 in the bios as a 1.44mb drive. Still didn't work, so i enabled Boot up Floppy Seek. Still didn't work, and i finally found out that another setting 'FDC Controller' was disabled, which i needed to enable. Then the floppy drive worked, and it went without hitch from there on in. you also need to enable the Raid controller in the bios.
When the computer boots, the SATA controller part still says "Drive 1542311Mb - Drive not found" or something, although this doesn't seem to matter since windows is able to recognise it.
I found all this out the hard way, and i looked for a long time online to find an easier way of doing it, or clear instructions detailing every step necessary, and i found a FAQ page on shuttle.com (afterwards!) which details the process very well, its a shame it was so hard to find through the shuttle web site.
But my shuttle is fast and very lovely, and it is the quietest thing i have never heard. I can't figure out why they make you press the reset button with a pen though, its so tiny. In the end, i love it.
Monday, 31 May 2004 00:20:44 (GMT Daylight Time, UTC+01:00) General
Monday, 24 May 2004
Environment.SpecialFolder enumeration not showing up in Visual Studio Intellisense
I was using an OpenFileDialog and i wanted it to open at the My
Pictures folder for the current user. So i looked up the msdn
docs for how to locate this folder, and i come across the
Environment.SpecialFolder enumeration, which has an entry for
MyPictures. Great, my code then was:
this.openFileDialog1.InitialDirectory = Environment.SpecialFolder.MyPictures;
but this didn't compile, and it didn't show up
in Intellisense. I read a few examples online which used the
this.openFileDialog1.InitialDirectory = Environment.GetFolderPath(Environment.SpecialFolder.MyPictures);
and it worked, although it still didn't show up in
Intellisense. you'd think MS would at least explain this in the
Monday, 24 May 2004 12:34:15 (GMT Daylight Time, UTC+01:00) .Net Windows Forms
Saturday, 17 April 2004
Use a HOSTS file to block banner ads
You can use the HOSTS file in Windows to prevent banners from displaying in web pages. It is usually in c:\windows\system32\drivers\etc. Note that it has no file extension. There are a few good sample files online that contain thousands of known advertisers. I use http://everythingisnt.com/Hosts as a reference. If that link is down, use my mirror copy (29 k). The way it works is by redirecting the url (e.g. ad.doubleclick.net) to your own computer, instead of the proper doubleclick.net server. Your local web server (if you have one) won't contain any of banner images or pages requested and you see a 404 page not found in the browser in place of the banner image / web page.
Saturday, 17 April 2004 17:53:23 (GMT Daylight Time, UTC+01:00) General
Saturday, 03 April 2004
ADO.NET parameter quirks with ODBC and OleDb
The OleDb Provider
If anyone is using the Oledb provider with .Net, when you are adding parameters to an OleDbCommand in code, make sure you add them in the order that they belong in the sql string.
For example, if your sql string is:
"insert into table1 (username, password) values(?,?)"
and you have parameters added to the command (usually done through a configure OleDbDataAdapter wizard), called "@Username" and "@Password". Your code must add the parameters in the correct order as follows:
this.oledbCommand1.Parameters("@Username").Value = username;
this.oledbCommand1.Parameters("@Password").Value = password;
If you don't do it this way, you may get a jet error: "No value given for one or more required parameters.".
This quirk does not apply for the Sql provider in ADO.NET, because you can name the parameters in the sql string, e.g.
"insert into table1 (username, password) values(@Username, @Password)"
The ODBC Provider
If you're using the ODBC provider with .NET (probably for MySQL), there is one oddity that you should know about too. In sql strings for odbcCommand objects, you can't use the @ParamName syntax. You have to use question marks as placeholders for the parameters as follows:
Saturday, 03 April 2004 18:07:08 (GMT Daylight Time, UTC+01:00) Database
"insert into table1 (username, password) values(?,?)"
Similarly, you have to add the parameters in the right order.